Tratopedia
繁中
Settings

Text size

Language

Theme

High contrast

Version

v1.230.2

The release this page was built from. It is what the service worker caches under.

Slide deck

Back

Sequencing a Genome at Home — The Full ONT MinION Workflow

A single Oxford Nanopore MinION flow cell yields about 30 Gb — roughly 10× genome coverage, short of the 30× the UK Biobank uses for confident variant calls. One home run's consumables cost about US$1,100 in April 2026; Oxford Nanopore's list prices have since moved both ways.

  1. Workflow brief · Genomics

    One flow cell and four hours of handwork buys about 10× coverage

    About 10× of a human genome from one MinION flow cell — short of the 30× the UK Biobank uses for confident variant calls.

    Sequencing a genome at home1 / 19

  2. What happened

    One home run, as its author reports it

    • $1,100reported cost per run, Apr 2026 (author's own account)
    • 4 hhands-on time
    • 72 hstart to finish
    • ~10×whole-genome coverage from ~30 Gb

    Sequencing a genome at home2 / 19

  3. What happened

    How firmly each part stands

    The blog and its coverage are confirmed. What happened inside it is self-reported.

    How firmWhat
    ConfirmedThe blog exists at a working address, read directly; Tom's Hardware covered it on 21 Apr 2026.
    ConfirmedThe MinION Mk1D, the R10.4.1 flow cell and the SQK-LSK114 kit are real products on sale.
    Confirmed, but not verifiable hereThe home run itself: extraction, library prep, 48 hours on the MinION, ~30 Gb at ~10×.
    Confirmed, but not verifiable hereThe reported cost (~US$1,100) and timings (~4 h hands-on, 72 h total).

    Sequencing a genome at home3 / 19

  4. Timeline

    From a 2024 device to an April 2026 kitchen table

    1. 22–23 May 2024Oxford Nanopore announces the MinION Mk1D at its "London Calling" conference. It supersedes the Mk1B the workflow below was run on, and is the generation the cost table prices.
    2. ~18 Apr 2026The run the blog describes appears to take place — implied by a dated file path in its own worked command example, not stated outright.
    3. Before 21 Apr 2026The blog post, "How I sequenced my genome at home", goes up. It carries no visible byline or dateline; the exact date could not be established.
    4. 21 Apr 2026Tom's Hardware (Mark Tyson) reports on the blog, naming its equipment list and its author's stated family motivation.

    Sequencing a genome at home4 / 19

  5. The argument

    Why do this: the author's own three reasons

    • Curiosity — a system to touch, change, break and rebuild, as a Raspberry Pi or a Jetson Nano is.
    • A family history of autoimmune disease — personal context, not a finding this page can verify or build on.
    • Understanding the workflow itself — the purpose and failure mode of every step, not just a report at the end.

    Sequencing a genome at home5 / 19

  6. The argument

    One flow cell, two ways to spend its budget

    Breadth or depth — the choice decides what can later be claimed

    MeasureOption A — shallow whole genomeOption B — adaptive sampling
    Coverage~10×~30–50× over the target region
    ScopeThe whole genomeA specified panel, as a BED file
    Target size—Under 1% of the genome is ideal; under 5% keeps 30× reachable
    Rare variant detectionNot dependable — cannot reliably separate a real one-in-ten-reads signal from noiseReasonably confident, within the panel
    SuitsA broad first look at the genomePharmacogenes, HLA, autoimmune loci — a specific, named question

    Sequencing a genome at home6 / 19

  7. The argument

    Adaptive sampling: free targeted enrichment

    The pore's time goes back to the regions of interest — with no custom DNA probes, no PCR and no specially designed library.

    1. 01Readthe first ~500 bases of every fragment
    2. 02Checkagainst a reference
    3. 03Ejectan off-target fragment, by reversing the voltage

    Sequencing a genome at home7 / 19

  8. The argument

    A real result, and not the same tier of result

    • ~10×a home run's whole-genome pass
    • 30–50×a home run on a narrow panel
    • 32.5×UK Biobank's average depth over 490,640 genomes, at least 23.5× per individual
    • >120 Gbper sample, Illumina's own figure for 30×

    Sequencing a genome at home8 / 19

  9. The technology

    How a nanopore reads DNA

    Bases recovered from changes in current

    • ~2,048pore sites per flow cell; at least 800 active guaranteed
    • ~30 Gbfrom one flow cell in 48 hours (Oxford Nanopore: 20–40 Gb for a fresh cell)
    • ~10×of a human genome of about 3.2 Gb
    • Reads can run to tens of thousands of bases, far beyond a short-read platform's 150 bp.
    • With a methylation-capable model, 5mC and 5hmC calls go straight into BAM tags — by a basecaller update, with no new chemistry.

    Sequencing a genome at home9 / 19

  10. Cost

    Equipment and consumables, priced twice

    What the author reported paying, and what Oxford Nanopore lists today

    ItemAuthor reported, Apr 2026Current list, Aug 2026
    MinION Mk1D~$3,200$3,150
    R10.4.1 Flow Cell (FLO-MIN114)~$900$840
    SQK-LSK114 Ligation Kit~$100/rxn (6-rxn pack ~$610)$720 / 6 rxn ≈ $120/rxn
    NEBNext Companion Module v2~$55/rxnCould not be established
    Monarch T3010 gDNA Kit~$3/prepCould not be established
    Flow Cell Wash Kit (EXP-WSH004)~$17/wash$120/kit
    Sundries~$50Varies by supplier

    Sequencing a genome at home10 / 19

  11. Cost

    About US$1,100: what one person reported spending

    • $1,100reported cost per run, Apr 2026 (author's own account)
    • 6reactions in a ligation kit pack
    • 24reactions in an NEB module pack
    • Not a re-derived total: on Oxford Nanopore's current list some lines are cheaper and the ligation kit's pack dearer, and two NEB lines could not be re-priced.
    • Running this once wastes most of a pack — the hardest part of the cost to avoid, whichever year's prices are used.

    Sequencing a genome at home11 / 19

  12. At the bench

    Six steps at the bench

    About four hours of hands-on work, 72 hours end to end.

    1. 01Set up, check poresat least 800 active
    2. 02Extract DNA~30 min
    3. 03Prepare library~70 min
    4. 04Loadhighest risk
    5. 05Sequence, monitor48 h
    6. 06Basecalland align

    Sequencing a genome at home12 / 19

  13. At the bench

    Where library preparation goes wrong

    Five specific failure modes, from the author's own account

    StepWhat matters
    Drying AMPure beadsThirty seconds is enough. Longer and they crack and stick to the tube wall, losing DNA irreversibly.
    The second cleanupUse Long Fragment Buffer. Ethanol destroys the motor protein on the adapter.
    Enzyme mixesNever vortex. Glycerol-containing enzyme solutions lose activity once they foam; flick to mix instead.
    Ligation bufferIt is viscous. Pipette-mix slowly, or it will look mixed while still layered, and ligation efficiency suffers.
    A good yield150–450 ng of library in 15 µL; load 12 µL and keep the rest for a reload.

    Sequencing a genome at home13 / 19

  14. At the bench

    Loading: air is the enemy

    The greatest risk is a bubble entering the flow cell: draw back no more than 30 µL, add liquid slowly, stop the moment a bubble appears.

    • ≤30%pore occupancy: do a nuclease wash and reload
    • ~400 b/snormal translocation speed; a sharp drop means the pores are deteriorating
    • ~4 kbtypical read-length peak for buccal cells

    Sequencing a genome at home14 / 19

  15. Analysis

    Choosing a basecalling model

    Fast, hac, and sup, in order of increasing accuracy and cost

    ModelPer-base accuracy (author's own figure)SpeedWhen to use it
    HAC~99%Fast enough to run liveThroughout the run; Oxford Nanopore's own documentation recommends it for most users
    SUP~99.5%Slow — roughly ten times slower than HACRe-run afterwards over regions of interest

    Sequencing a genome at home15 / 19

  16. Analysis

    From reads to an aligned genome

    One run, on the author's own benchmark: about 49 GB of raw pod5 signal, 6 GB of BAM and 1 GB of logs.

    1. 01minimap2align to GRCh38
    2. 02samtoolsthe author expects over 95% mapped
    3. 03mosdepththe author's rule of thumb: 5–6× enrichment on a 1% panel; 1× means adaptive sampling was not active
    4. 04aligned.bamvariant calling, HLA phasing, pharmacogenomic typing

    Sequencing a genome at home16 / 19

  17. Conclusion

    Who this suits

    Learning by doing

    Anyone who wants to understand sequencing by doing it: every step's purpose and failure mode becomes concrete.

    A specific, named question

    About a specific genomic region: adaptive sampling gives 30–50× on a narrow panel with no custom probes.

    Bench experience

    Researchers who can already handle cold chain, QC and data analysis.

    Sequencing a genome at home17 / 19

  18. Conclusion

    Three hard limits

    Cost

    The author reported about US$1,100 for one run, and lab-sized packs mean a single run wastes most of a pack.

    Shallow coverage

    About 10× over a whole genome: enough for common variants, well short of the 30× the UK Biobank uses for confident calls.

    No DNA QC instrument

    Without a fluorometer, a low yield and a failed prep look identical until the run itself fails.

    Sequencing a genome at home18 / 19

  19. What to remember

    Understanding, not diagnosis

    Not a diagnostic procedure

    A variant call, at any depth, is not a diagnosis. Anything that looks worrying belongs with a qualified clinician working from accredited, formal test data.

    Understanding, not replacement

    The value is in understanding how sequencing works and answering a narrow question through adaptive sampling — not in replacing an accredited test.

    Sequencing a genome at home19 / 19